欢迎访问济南海曼仓储设备有限公司官网! 返回首页 - 联系我们 - 关于我们

你知道重型货架的存储方式有哪些?

发布时间:2019-10-04  来源:  浏览量:62

你知道重型货架的存储方式有哪些?


相对普通重型货架而言不需要操作通道,故增加60%的空间利用率;托盘操作遵循先进先出的原则;自动储存回转;储存和拣选两个动作的分开大大提高输出量,由于是自重力使货物滑动,而且没有操作通道,所以减少了运输路 线和叉车的数量重型货架。在货架每层的通道上,都安装有一定坡度的、带有轨道的导轨,入库的单元货物在重力的作用下,由入库端流向出库端重型货架。这样的仓库,在排与排之间没有作业通道,大大提高了仓库面积利用率重型货架。但使用时,最好同一排、同一层上的货物,应为相同的货物或一次同时入库和出库的货物重型货架。层高可调,配以各种型号 叉车或堆垛机,山东重型货架能实现各种托盘的快捷存取,单元货格最大承载可达5000kg,是各行各业最常用的存储方式重型货架。 


山东重型货架


(1)根据以上的信息,首先会根据托盘的尺寸计算出货架所需的横梁长度,两个托盘的长度加上托盘与托盘之间以及托盘与货架立柱之间的间隙,我们的标准通常为100,即1200*2+300=2700,而算出的2700即为货架的尺寸;


(2)根据计算出来的横梁长度,每层承重算出货架所需的材料,即120的抱合梁;


(3)货物高度1100,每层横梁与货物之间需留150的安全距离(安全起叉距离),即1250*3,而顶层货物通常留500即可,根据此可算出货架高度为1250*3+120(横梁材料高度)*3+500=4610,通常立柱为75孔距,因而立柱高度为4800H重型货架。


(4)托盘的深度方向为1000,而在设计中我们通常会减少100,从而方便货物正常摆放在货架上;


以上,可计算出重型横梁式货架的尺寸为:2700L*900D*4800H;


适用于场地有限品种繁多,数量少的情况下,它能在现有的场地上增加几倍的利用率,可配合使用升降机操作重型货架。全组合式结构,专用轻钢楼板,造价低,施工快重型货架。全组合式结构,专用轻钢楼板,造价低,施工快。可根据实际场地和需要,灵活设计成二层、多层、充分利用空间。

Do you know how heavy shelves are stored?




Compared with ordinary heavy-duty shelves, there is no need for operating channels, so the space utilization rate is increased by 60%. Pallet operation follows the principle of first-in-first-out; automatic storage and rotation; the separation of storage and picking greatly improves the output. Because of self-gravity, the cargo slides and there is no operating channels, so the number of transportation routes and forklifts is reduced. A certain gradient rail with track is installed in each passageway of the shelf. Under the action of gravity, the unit goods in storage flow from the storage end to the storage end. This kind of warehouse has no working channel between platoon and platoon, which greatly improves the utilization ratio of warehouse area. However, when using, it is better to use the same row of goods on the same layer, which should be the same goods or goods that are in and out of the warehouse at the same time. With adjustable height and all kinds of forklifts or stacker, Shandong heavy duty rack can realize quick access to various pallets. The maximum load of unit pallets can reach 5000kg, which is the most commonly used storage method in all walks of life.




Heavy duty rack




(1) According to the above information, the length of the cross beam needed for the shelf will be calculated according to the size of the pallet. The length of the two pallets plus the gap between the pallet and the pallet, and between the pallet and the column of the shelf. Our standard is usually 100, i.e. 1200*2+300=2700, and the calculated 2700 is the size of the shelf.




(2) According to the calculated length of the cross beam, the material required for the shelf, i.e. 120 embracing beams, can be calculated for each load-bearing layer.




(3) The height of the goods is 1100, and 150 safe distance (safe starting distance) is required between each cross beam and the goods, i.e. 1250*3, while the top cargo is usually 500. According to this, the height of the shelf is 1250*3+120 (material height of the cross beam)*3+500=4610, and the height of the column is usually 75 holes, so the height of the column is 4800 H.




(4) The depth direction of pallet is 1000, but in design we usually reduce it by 100, so as to facilitate the normal placement of goods on the shelf;




Above all, the size of heavy cross beam shelf can be calculated as: 2700L * 900D * 4800H;




It is suitable for the situation of limited variety and small number of sites. It can increase the utilization ratio several times on the existing sites, and can cooperate with the operation of elevators. Full combination structure, special light steel floor, low cost, fast construction. According to the actual site and needs, it can be flexibly designed into two layers, multi-layers and make full use of space.


推荐新闻
推荐产品
盖土网厂家    安全网厂家    防尘网厂家    济南喷塑加工厂    阁楼货架厂家    工作台厂家    天津重型货架    太原货架厂家    石家庄仓储货架    长春仓库货架    青岛货架厂    沈阳重型货架   
-->